3D REVIEW 3D MODELS

LIFT PLUG VALVE

SPECIFICATIONS
VALVE SIZES 2" TO 36"
CLASS RATINGS CLASS 150 TO 2500
END CONNECTIONS FLANGED (RF, RTJ) & BUTT WELDED ENDS
TYPE OF DESIGN NON LUBRICATED, TOP ENTRY, RISING STEM, BOLTED BONNET, METAL SEATED, etc.,
BODY PATTERN SHORT & LONG PATTERN
OPERATOR HANDWHEEL, CHAIN HANDWHEEL, GEAR, PNEUMATIC, & ELECTRICAL ACTUATORS
ACTUATOR ACCESSORIES LIMIT SWITCH, AIR FILTER REGULATOR, QUICK EXHAUST VALVE, VOLUME BOOSTER, SOLENOID VALVE, CONTROL PANEL etc.,
SPECIAL REQUIREMENTS STELLITED SEATS, VENT & DRAIN ARRANGEMENT, INTERNAL ALLOY CLADDING , FUGITIVE EMISSION TESTING, FIRE TESTING, INTERNAL & EXTERNAL SPECIAL COATING, LOCKING ARRANGEMENT, SPECIAL SERVICE APPLICATION, POSITION INDICATOR etc.,

Note:

 MANUFACTURING SIZES RANGES WILL BE BASED ON HIGH PRESSURE CLASSES, SERVICE APPLICATION AND REQUIREMENTS.

 CONSULT FACTORY FOR LARGE SIZE VALVES.

STANDARD REFERENCE
DESIGN API 6D & ASME B16.34
FACE TO FACE API 6D, ASME B16.10
END CONNECTION ASME B16.25, ASME B16.5, ASME B16.47 SER - A & B
TESTING API 6D, API 598, EN 12266, BS 6755 PART-1 & 2, API 641, ISO-15848-1 & 2 etc.,
NACE COMPLIANCE NACE MR 0175 / ISO 15156, NACE MR 0103
PR RATING ASME B16.34
MATERIAL OF CONSTRUCTION
BODY / BONNET / YOKE CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, DUPLEX & SUPER STAINLESS STEELS, HIGH NICKEL ALLOYS, EXOTIC MATERIALS IF ANY.
TRIM MATERIALS STAINLESS STEEL, ALLOY STEEL, DUPLEX & SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, EXOTIC MATERIALS IF ANY.
PACKINGS GRAPHITE, GRAPHOIL, BRAIDED GRAPHITE, FUGITIVE EMISSION PACKING, SPECIAL SERVICE PACKING etc.,
GASKET SPIRAL WOUNDED, INNER RING & OUTER RING GASKET, RING TYPE (RTJ), METAL GASKET IN SOFT IRON.
O-RING NBR, FKM, FFKM, NBR, EPDM, FEPM, etc.,
FASTENERS ASTM A193 Gr.B7/A194 Gr.2H, B7M/2HM, B8/8, B8M/8M, B16/4 etc.,
HANDWHEEL MALLEABLE, CAST IRON, CARBON STEEL etc.,

Note:

 ACTUAL MATERIALS OF CONSTRUCTION WILL DEPENDS UPON THE VALVE SIZE, PRESSURE CLASS, TEMPERATURE AND SERVICE CONDITIONS.

 OTHER MATERIALS ARE ALSO AVAILABLE UPON REQUEST.

 SPECIAL TESTINGS SHALL BE PERFORMED UPON CUSTOMER REQUIREMENT.