3D REVIEW 3D MODELS

4WAY DIVERTER VALVE

SPECIFICATIONS
VALVE SIZES 2" TO 250"
CLASS RATINGS CLASS 150 TO 900
END CONNECTIONS FLANGED (RF, RTJ)
DESIGN TYPE BOLTED BONNET, OS&Y & RISING STEM
TYPE OF PORT FULL PORT(PIGGABLE) & REDUCED PORT
OPERATOR HANDWHEEL, GEAR, HYDRAULIC, ELECTRICAL ACTUATORS & ELECTRO-HYDRAULIC ACTUATORS
ACTUATOR ACCESSORIES SOLENOID VALVE, HAND PUMP, LIMIT SWITCH etc.,
SPECIAL REQUIREMENTS LATCHING DEVICES, BLEED SYSTEM, SPECIAL SEALING MATERIAL, SPECIAL TRIM MATERIAL, DIFFERENTIAL PRESSURE SWITCHES, RELIEF SYSTEM, HAZARDOUS AREA CLASSIFICATION, POSITION INDICATOR, LOCKING ARRANGEMENT etc.,

Note:

  MANUFACTURING SIZES RANGES WILL BE BASED ON HIGH PRESSURE CLASSES, SERVICE APPLICATION AND SPECIAL REQUIREMENT IF ANY.

  CONSULT FACTORY FOR LARGE SIZE VALVES.


STANDARD REFERENCE
DESIGN API 6D, ASME B16.34
FACE TO FACE API 6D & MFG. STANDARD
END CONNECTION ASME B16.5
TESTING API 598, API 6FA, ISO 10497, BS 6755, Etc.,
NACE COMPLIANCE NACE MR 0175 / ISO 15156, NACE MR 0103
PR RATING ASME B16.34
MATERIAL OF CONSTRUCTION
BODY & BONNET CARBON STEEL, LOW CARBON STEEL, STAINLESS STEEL, DUPLEX & SUPER DUPLEX STAINLESS STEELS, HIGH NICKEL ALLOYS, EXOTIC MATERIALS, Etc., IF ANY.
PLUG CARBON STEEL WITH CHROME PLATED, STAINLESS STEEL, ALLOY STEEL, DUPLEX & SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, EXOTIC MATERIALS Etc.,
SLIPS CARBON STEEL, CAST DUCTILE IRON, Etc.,
O-RINGS VITON Etc.,
PACKINGS GRAPHITE, GRAPHOIL etc.,
GASKET SPIRAL WOUNDED, OCTAGONAL RING TYPE (RTJ), METAL GASKET IN SOFT IRON.
STUDS & NUTS ASTM A193 Gr.B7/A194 Gr.2H, B7M/2HM, B8/8, B8M/8M, L7M/GR.7M, L7/4, B16/2H etc.,
HANDWHEEL CAST IRON, DUCTILE IRON, MALLEABLE IRON, CARBON STEEL, IMPACT TESTED STEEL, Etc.,

Note:

  ACTUAL MATERIALS OF CONSTRUCTION WILL DEPENDS UPON THE VALVE SIZE, PRESSURE CLASS, TEMPERATURE AND SERVICE CONDITIONS.

  OTHER MATERIALS ARE ALSO AVAILABLE UPON THE REQUEST.

  SPECIAL TESTINGS ON VALVES SHALL BE PERFORMED BASED UPON CUSTOMER REQUIREMENT.