3D REVIEW 3D MODELS

DISCHARGE REGULATOR & FIXED CONE DISPENSER VALVE

SPECIFICATIONS
VALVE SIZES 2" TO 250"
CLASS RATINGS 150 to 1500
END CONNECTIONS FLANGED END
OPERATOR ELECTRICAL / GEARBOX / PNEUMATIC / HYDRAULIC
SPECIAL REQUIREMENTS HIGH VELOCITY / HIGH PRESSURE

Note:

 MANUFACTURING SIZES RANGES WILL BE BASED ON HIGH PRESSURE CLASSES, SERVICE APPLICATION AND SPECIAL REQUIREMENT IF ANY.

 CONSULT FACTORY FOR LARGE SIZE VALVES.

STANDARD REFERENCE
DESIGN ASME B16.34, ASME SECTION VIII
FACE TO FACE MANUFACTURER'S STANDARD
END CONNECTION ASME B16.1, ASME B16.5, ASME B16.47 SER - A / B, ASME B16.25, EN 1092, ISO 7005, AWWA C207
TESTING API 598 , BS EN 12266 - 1 & 2, BS 6755 PART-1, ISO 5208
NACE COMPLIANCE NACE MR 0175 / ISO 15156, NACE MR 0103
PT RATING ASME B16.34
MATERIAL OF CONSTRUCTION
BODY CAST IRON, DUCTILE IRON, COPPER ALLOYS, CARBON STEEL, LOW TEMPERATURE CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, OTHER SPECIAL MATERIALS UPON REQUEST.
TRIM CAST IRON, DUCTILE IRON, COPPER ALLOYS, CARBON STEEL, LOW TEMPERATURE CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, DUPLEX / SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, OTHER SPECIAL MATERIALS UPON REQUEST.
FASTENERS ASTM A193 Gr.B7/A194 Gr.2H, B7M/2HM, B8/8, B8M/8M, B16/2H

Note:

 ACTUAL MATERIALS OF CONSTRUCTION WILL DEPENDS UPON THE VALVE SIZE, PRESSURE CLASS, TEMPERATURE AND SERVICE CONDITIONS.

 OTHER MATERIALS ARE ALSO AVAILABLE UPON THE REQUEST.

 SPECIAL NDE & OTHER TESTING SHALL BE PERFORMED UPON CUSTOMER REQUIREMENT.