3D REVIEW 3D MODELS

3 WAY BALL VALVE

SPECIFICATIONS
VALVE SIZES 1" TO 24"
CLASS RATINGS CLASS 150 TO 2500, 2000 TO 20000 PSI
END CONNECTIONS FLANGED (FF, RF, RTJ), BUTT WELD END & SCREWED END
DESIGN TYPES TWO PIECE DESIGN, THREE PIECE DESIGN, TOP ENTRY DESIGN & FULLY WELDED DESIGN
PORT TYPE REDUCED PORT, FULL PORT & CUSTOMISED PORT
OPERATOR LEVER, GEAR, PNEUMATIC, HYDRAULIC & ELECTRIC ACTUATORS
ACTUATOR ACCESSORIES LIMIT SWITCH, AIR FILTER REGULATOR, SOLENOID VALVE, POSITIONER, PLC & SCADA CONTROL SYSTEM etc.,
SPECIAL REQUIREMENTS METAL TO METAL SEAT, FUGITIVE EMISSION TESTING, BLOW OUT PROOF STEM, ANTISTATIC DEVICE, FIRE SAFE DESIGN, LIVE LOADING ARRANGEMENT FOR VOC SERVICE, LOCKING ARRANGEMENT, INTERNAL & EXTERNAL SPECIAL COATING FOR SPECIAL SERVICE, LOW TEMPERATURE SERVICE, AUTOMATIC BLEEDING SYSTEM, DPE & SPE, DIB DESIGN, ENP, TCC & OVERLAY ON BODY & BALL, HEATING JACKET, TRANSITION PUP PIECE FOR BW ENDS, INSULATION etc.,

STANDARD REFERENCE
DESIGN API 6D, API 6A & ASME B16.34
FACE TO FACE ASME B16.10, API 6D
END CONNECTION ASME B1.20.1, ASME B16.25, ASME B16.5, API 6A FLANGES
TESTING API 598 , API 6D, API 6A, EN 12266 - 1 & 2, BS 6755 PART-1, ISO 5208, ISO-15848 -1 & 2, API 607, API 6FA etc.,
NACE COMPLIANCE NACE MR 0175 / ISO 15156, NACE MR 0103
PT RATING ASME B16.34

MATERIAL OF CONSTRUCTION
BODY / END CONNECTOR CARBON STEELS, LOW TEMPERATURE CARBON STEEL, MARTENSITIC STEELS, AUSTENITIC STAINLESS STEEL, DUPLEX STAINLESS STEELS, SUPER DUPLEX STAINLESS STEELS, HIGH NICKEL ALLOYS, HASTELLOY, INCONNEL, TITANIUM ALLOY & CARBON STEEL WITH INTERNAL CORROSION RESISTANT ALLOY (CRA) OVERLAY
TRIM STAINLESS STEEL, ALLOY STEEL, DUPLEX & SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, EXOTIC MATERIALS IF ANY.
SEAT PTFE, RPTFE, GLASS FILLED, PEEK, DEVLON, NYLON, METAL to METAL, VITON etc.,
PACKINGS AND SEALS PTFE, RPTFE, FILLED PTFE, NYLON, GRAPHITE, GRAPHOIL etc.,
GASKET MATERIALS PTFE, RPTFE, FILLED PTFE, PEEK, SPIRAL WOUNDED, OCTAGONAL RING TYPE (RTJ), METAL GASKET IN SOFT IRON.
BEARING PTFE, RPTFE, BRONZE, SS316 + PTFE etc.,
FASTENERS ASTM A193 Gr.B7/A194 Gr.2H, B7M/2HM, B8/8, B8M/8M, L7/Gr.7, L7M/GR.7M, L7/4, B16/4 etc.,
SPRINGS SPRING STEEL, INCONEL 625, INCONEL 825, INCONEL X-750, STAINLESS STEEL, CHROME STEEL, HIGH NICKEL ALLOYS, etc.,

Note

  ACTUAL MATERIALS OF CONSTRUCTION WILL DEPENDS UPON THE VALVE SIZE, PRESSURE CLASS, TEMPERATURE AND SERVICE CONDITIONS.

  OTHER MATERIALS ARE ALSO AVAILABLE UPON THE REQUEST.

  BODY & END CONNECTOR SHALL BE INTEGRALLY FORGED OR CASTED AS PER CUSTOMER REQUIREMENT.

  SPECIAL NDE & OTHER TESTING SHALL BE PERFORMED UPON CUSTOMER REQUIREMENT.