3D REVIEW 3D MODELS

Double Block and Bleed Ball Valve Stockist in Timor-Leste

STANDARD

REFERENCE

DESIGN ISO 17292, API 6D, ASME B16.34
FACE TO FACE ASME B16.10, API 6D
END CONNECTION ASME B16.11, ASME B16.5, ASME B16.25, ASME B16.47 SER A & B etc.,
TESTING API 598 , API 6D, EN 12266, BS 6755 PART-1, ISO-15848-1 & 2, API 607, API 6FA or ISO 10497 etc.,
NACE COMPLIANCE NACE MR 0175 / ISO 15156, NACE MR 0103
PT RATING ASME B16.34

SPECIFICATIONS
VALVE SIZES 1/2" TO 24"
CLASS RATINGS CLASS 150 TO 2500
END CONNECTIONS FLANGED (FF, RF, RTJ), SOCKET WELDED, BUTT WELDED ENDS & THREADED ENDS
DESIGN TYPES SINGLE PIECE DESIGN, SPLIT BODY & SIDE ENTRY, TOP ENTRY, FULLY WELDED.
TYPE OF PORT FULL PORT & REDUCED PORT
OPERATOR LEVER OR WRENCH, GEARBOX, PNEUMATIC, HYDRAULIC & ELECTRIC ACTUATORS
ACTUATOR ACCESSORIES PNEUMATIC POSITIONER, LIMIT SWITCH, AIR FILTER REGULATOR, VOLUME BOOSTER, IP CONVERTER, SOLENOID VALVE, SCADA CONTROL etc.,
SPECIAL REQUIREMENTS METAL TO METAL SEAT, INTERNAL ALLOY CLADDING , FUGITIVE EMISSION TESTING, ANTISTATIC DEVICE, FIRE SAFE DESIGN, LOCKING ARRANGEMENT, INTERNAL ELASTOMERIC LINING, INTERNAL COATING, CAVITY RELIEF, SELF RELIEVING OR DOUBLE PISTONE EFFECT SEATS etc.,

Note:

MATERIAL OF CONSTRUCTION
BODY / END CONNECTOR CARBON STEEL, LOW CARBON STEEL, STAINLESS STEEL, DUPLEX & SUPER STAINLESS STEELS, HIGH NICKEL ALLOYS, EXOTIC MATERIALS IF ANY.
TRIM STAINLESS STEEL, DUPLEX & SUPER DUPLEX STAINLESS STEEL, HIGH NICKEL ALLOYS, EXOTIC MATERIALS IF ANY.
SEATS PTFE, RPTFE, FILLED PTFE (GRAPHITE FILLED, GLASS FILLED, CARBON FILLED), PEEK, DEVLON, METAL to METAL SEAT etc.,
SEALS & PACKINGS PTFE, RPTFE, GRAPHITE, GRAPHOIL etc.,
GASKET PTFE, RPTFE, PEEK, SPIRAL WOUNDED, OCTAGONAL RING TYPE (RTJ), METAL GASKET IN SOFT IRON.
BEARING PTFE, RPTFE, BRONZE, SS316 + PTFE etc.,
STUDS & NUTS ASTM A193 Gr.B7/A194 Gr.2H, B7M/2HM, B8/8, B8M/8M, L7/4, B16/2H etc.,
SPRING SPRING STEEL, INCONEL X-750, STAINLESS STEEL, CHROME STEEL, HIGH NICKEL ALLOYS

Note: